Huawei RH1288 V2 Rack Server

General

Memory

Maximum number of double data rate 3 (DDR3) DIMMs: 24 Maximum memory capacity: 768 GB Capacity of a single DIMM: 4 GB, 8 GB, 16 GB, or 32 GB Memory speed: DDR3 800/1066/1333/1600/1866 MHz

Chipset

Intel® C602 chipset.

Network port

Four types of NICs are supported, providing the following network ports: Two GE electrical ports, supporting Network Controller Sideband Interface (NCSI), Wake on LAN (WOL), Preboot eXecution Environment (PXE). Four GE electrical ports, supporting NCSI, WOL, PXE. Two 10GE optical ports, supporting NCSI, PXE. Two 10GE electrical ports, supporting NCSI, WOL, PXE.

I/O port

One onboard DVD-ROM/DVD-RW connector Five USB 2.0 ports: two on the front panel, two on the rear panel, and one on the mainboard One USB flash port on the mainboard One VGA port on the front panel for the RH1288 V2-8S and none for the RH1288 V2-4L; one VGA port on the rear panel for either server One RS232 port on the rear panel One RJ45 management port on the rear panel

DVD-ROM drive

DVD-ROM/DVD-RW drive, optional when the server is RH1288 V2 (8 hard disks).

Expansion slots

A maximum of three PCIe cards are supported: One standard PCIe slot of full height and full length One standard PCIe slot of half height and half length One non-standard PCIe slot for installing a RAID controller card The PCIe slots support the Huawei PCIe iNIC to improve the I/O bandwidth and throughput. The PCIe slots support one Huawei PCIe SSDs for search, cache, and download services to greatly improve the I/O performance. The PCIe expansion slots support the GPUs, such as Quadro 2000.

Certification

Including CCC, CE, FCC, IC, VCCI, and C-tick

Dimensions (H x W x D)

43.6 mm (1 U) x 447 mm x 740 mm (1.72 in. x 17.60 in. x 29.92 in.)

Installation dimensions

The rack server can be installed in a common rack that complies with the IEC 297 standard: Width: 19 inches Depth: > 1000 mm (39.37 inches) Guide rail installation requirements are as follows: L-shaped guide rail: applies only to Huawei cabinets. Adjustable guide rail: The distance between the front rear mounting bars is 557 mm to 862 mm.

Rated power

The rated power for compatible PSUs: 460 W 750 W 800 W

Weight (in full configuration)

Net weight: Eight 2.5-inch HDDs: 19.6 kg (43.22 lb) Four 3.5-inch HDDs: 20 kg (44.10 lb) Packing material weight: 5.3 kg (11.68 lb)

Rated input voltage

AC: 100 to 240 V AC DC: -48 V DC to -60 V DC NOTE: The recommended current specification for the external power circuit breaker connected to the server is 32A. AC module Emerson 800W-AC(EPW800W-AC) and DC modules not support the high tension directing current.

Temperature

Operating temperature: 5°C to 35°C (41°F to 95°F) Storage temperature: -40°C to +65°C (-40°F to +149°F) The temperature change rate is smaller than 20°C (36°F)/h. Long-term storage temperature: 21°C to 27°C (69.8°F to 80.6°F)

Altitude

≤ 3000 m (9842 ft). When the altitude is higher than 900 m (2952.72 ft), the operating temperature decreases by 1°C (1.8°F) per 300 m (984.24 ft).

Humidity

Operating humidity: 8% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing) The humidity change rate is smaller than 20% RH/h. Long-term storage humidity: 30% RH to 69% RH (non-condensing)

Acoustic Noise

The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7999 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle: LWAd: 6.0 Bels LpAm: 43.0 dBA Operating: LWAd: 6.7 Bels LpAm: 50.1 dBA NOTE: The actual sound levels generated during server operating vary depending on the server configuration, load, and ambient temperature.