EA5800-X17
Huawei SmartAX EA5800 Series OLT
Key facts
- Part number
- EA5800-X17
- Brand
- Unbranded / unknown
- Category
- Other
- Price
- Contact us for pricing
- Availability
- On request — ask for a quote
The EA5800-X17 is an other listed in the Prology Parts Index. Request a quote for volume pricing, or sell us your used others.
Overview
EA5800-X17 is the Huawei EA5800 model, supporting Service board or upstream interface board slots: 1 to 8, 11 to 19. Developed based on the distributed architecture, the Huawei SmartAX EA5800 series multiservice access device is positioned as the next-generation OLT for NG-PON. With virtual access technology, it provides a unified carrying platform for multiple services over one fiber network, such as broadband, wireless, video, and monitoring. The EA5800 provides GPON, XG-PON, XGS-PON, P2P GE, and 10GE access, and supports POL, FTTH, FTTB, and FTTC network construction modes. Thus it simplifies network architecture and reduces OPEX.
Table 1 shows the quick spec.
Huawei SmartAX EA5800 provide these highlights:
Distributed Architecture: High Performing and Non-blocking
The EA5800 distributes service processing on the control board to every service board, improving system switching capacity and performance. Each slot can support a throughput of up to 100 Gbit/s, ensuring smooth services without interruption. The EA5800 supports distributed caching for channel zapping and fast starting of HD videos.
Software Hitless Upgrade: Upgrade Anytime
In the distributed architecture, control and forwarding are isolated, ensuring that services are not interrupted during device upgrades. This also reduces user complaints. Devices can be upgraded at daytime.
High Reliability
The EA5800 supports multiple protection mechanisms.
Type B/type C dual-homing implements remote disaster recovery.
2 control boards and 2 power boards for redundancy.
Dual-uplink protection.
Integrated Multiple Access Technologies
The EA5800 supports multiple access technologies, such as GPON, XG-PON, XGS-PON and P2P. Thus it is possible to carry multiple services on one optical network and save network construction costs.
Supported Boards
Table 2 shows the recommended boards of this model.
Compare to Similar Items
Table 3 shows the comparison.
Get More Information
Do you have any question about the EA5800-X17
Specifications
General
- Supported Cabinets
- N63E-22
- Board Configuration
- Control board slots: 9, 10 Service board or upstream interface board slots: 1 to 8, 11 to 19 Universal interface board slot: 0 Power board slots: 20, 21
- Dimensions (W x D x H)
- 11U high and 21 inches wide Excluding mounting brackets: 493 mm x 287 mm x 486 mm Including mounting brackets: 535 mm x 287 mm x 486 mm
- Maximum Input Current
- 60A
- Power Supply Modes
- DC power support (dual for backup)
- Working Voltage Range
- -38.4V to -72V DC
- Rated voltage
- -48V/-60V
- Ambient Temperature
- -40°C to 65°C*. The EA5800 can start up at temperatures as low as -25°C. Note: The 65°C temperature refers to the highest temperature measured at the air intake vent of service subrack.
- Ambient Humidity
- 5% RH to 95% RH
- Atmospheric Pressure
- 70 kPa to 106 kPa
- Altitude
- 4,000m. The air density varies with altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the EA5800 varies with altitude.
- Switching Capacity of the Control Board (load sharing mode)
- 3.6 Tbit/s
- Maximum Bandwidth per Service Slot (load sharing mode)
- 100 Gbit/s
- System Layer 2 Packet Forwarding Rate (load sharing mode)
- 5,298 Mpps
- Maximum Number of Concurrent 4K Video Users
- 16,000
- Maximum Number of MAC Addresses
- 262,143
- Maximum Number of ARP/Routing Entries
- 131,072
- Switching/Forwarding Delay
- Short forwarding delay: The 100 Mbit/s Ethernet port sends 64-byte Ethernet packets at a delay shorter than 20 μs.
- Bit Error Rate (BER) in full load
- A BER smaller than 10e-7 for a port that transmits data in full load.
- System Reliability Specifications
- System availability for typical configurations: > 99.999% Mean-Time-Between-Failures (MTBF): About 45 years. Note: Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the EA5800 is only for reference. The average repair time for Field Replaceable Units (FRUs) is about 2 hours. The preceding values are only for reference. For details, please contact the relevant Huawei engineers.
- GPON Ports/ XG(S)-PON Ports
- 272
- GE/FE Ports
- 816
- 10 GE Ports
- 408
Price history
No price history has been recorded for this part yet.
Why buy from Prology
- Tested before dispatchEvery item is checked by our technicians before it ships.
- Warranty includedParts are covered by a Prology warranty – ask us for the terms.
- Fast shippingDispatched from our Australian and US locations.
- Real people, quick repliesQuotes and answers within 1 business day.
Request a quote for EA5800-X17
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.