AP8082DN

General

Dimensions (length x diameter)

387 mm x φ165 mm

Weight

3.9 kg

Interface type

1 x 10/100/1000M self-adaptive Ethernet interface (RJ45) 1 x 100/1000M/2.5G/5G self-adaptive Ethernet interface (RJ45) 1 x Management console port (RJ45) 1 x SFP fiber interface

Bluetooth

BLE4.1

LED indicator

Indicates the power-on, startup, running, alarm, and fault states of the system.

Power input

PoE power supply: in compliance with IEEE 802.3at/bt; only the 2.5G/5G port supports PoE input.

PoE out

15.4 W (only supported by GE interfaces)

Maximum power consumption

802.3bt power supply: 45 W (excluding the output power of the PoE_OUT port) 802.3at power supply: 25.5 W (The PoE_OUT function and GE/POE_OUT ports are unavailable, 5GE and SFP are mutually exclusive.) The actual maximum power consumption depends on local laws and regulations. In 802.3at power supply mode, the radio power is reduced, and the 2.4 GHz radio works in 2x4 MIMO mode.

Storage temperature

–40°C to +85°C

Dustproof and waterproof grade

IP68

Wind survivability

Up to 165 mph

Altitude

–60 m to 5,000 m

Atmospheric pressure

53 kPa to 106 kPa

Antenna type

Built-in directional antennas (horizontal 60°, vertical30°)

Antenna gain

2.4G: 7dBi 5G: 7dBi

Maximum number of SSIDs for each radio

16

Maximum number of users

≤ 512

Maximum transmit power

2.4G: 29 dBm (combined power) 5G: 28 dBm (combined power) The actual transmit power depends on local laws and regulations.

Power increment

1 dBm

Maintenance features

Unified management and maintenance on the AC in Fit AP mode Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode WDS zero-configuration deployment in Fit AP mode Mesh network zero-configuration deployment in Fit AP mode Batch upgrade in Fit AP mode Telnet STelnet using SSH v2 SFTP using SSH v2 Local AP management through the serial interface Web local AP management through HTTP or HTTPS in Fat AP mode Real-time configuration monitoring and fast fault location using the NMS SNMP v1/v2/v3 in Fat AP mode System status alarm Network Time Protocol (NTP) in Fat AP mode

BYOD

The AP supports bring your own device (BYOD) only in Fit AP mode. Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address. Identifies the device type according to the user agent (UA) information in an HTTP packet. Identifies the device type according to DHCP options. The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.

Location service

The AP supports the locating service only in Fit AP mode. Locates tags manufactured by AeroScout or Ekahau. Locates Wi-Fi terminals. Works with eSight to locate rogue devices.

Spectrum analysis

The AP supports spectrum analysis only in Fit AP mode. Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves. Works with eSight to perform spectrum analysis on interference sources.