AIR-AP4800-E1-K9

General

Description

802.11ac W2 Analytics AP w/CA; 4×3:3; Location; mGig -E Domain

Software and supported wireless LAN controllers

● Cisco Unified Wireless Network Software Release 8.7 or later● Cisco 3500 Series Wireless Controllers, 5520 Series Wireless Controllers, 8540 Series Wireless Controllers, and Virtual Wireless Controller, Cisco 9800 series Wireless Controllers● Cisco IOS ® XE Software Release 16.9● Cisco Catalyst ® 3850 Series and 3650 Series Switches

802.11n version 2.0 (and related) capabilities

● 4x4 MIMO with three spatial streams● Maximal Ratio Combining (MRC)● 802.11n and 802.11a/g beamforming● 20- and 40-MHz channels● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)● 802.11 Dynamic Frequency Selection (DFS)● Cyclic Shift Diversity (CSD) support

802.11ac Wave 1 capabilities

● 4x4 MIMO with three spatial streams● MRC● 802.11ac beamforming● 20-, 40-, and 80-MHz channels● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)● 802.11 DFS● CSD support

802.11ac Wave 2 capabilities

● 4x4 MU-MIMO with three spatial streams● MRC● 802.11ac beamforming● 20-, 40-, 80, 160-MHz channels● PHY data rates up to 5.2 Gbps● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)● 802.11 DFS● CSD support

Wi-Fi Alliance certifications

● Wi-Fi Certified a, b, g, n, ac● Wi-Fi Vantage● Wi-Fi Multimedia (WMM)● Passpoint

Integrated antenna

Flexible radio (either 2.4 GHz or 5 GHz)● 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth● 5 GHz, gain 5 dBi, internal directional antenna, elevation plane beam width 90°Dedicated 5-GHz radio● 5 GHz, gain 3.5 dBi, internal antenna, omnidirectional in azimuthThird dedicated radio● 2.4 GHz and 5 GHz capable● Hyperlocation antenna arrayBLE radio● 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth

Interfaces

● 2 Ethernet ports● 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz● Category 5e cabling● Higher-quality 10GBASE-T (Category 6/6a) cabling● 100/1000BASE-T autosensing (RJ-45 AUX port)● Management console port (RJ-45)

Indicators

● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H)

● Access point (without mounting brackets): 8.68 x 9.9 x 2.9 in. (22 x 25 x 7.35 cm)

Weight

● 5.6 lb (2.5 kg)

Input power requirements

● 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE ®)● 802.3at power injector (AIR-PWRINJ6=)● 50W power supply (AIR-PWR-50=)

Power draw

● 30W at the Power Source Equipment (PSE) with all features enabled except Multigigabit, AUX Ethernet, and USB support● 31W at the PSE with full functionality

Environmental

● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)● Nonoperating (storage) altitude test: 25˚C, 15,000 ft● Operating temperature: 32° to 104°F (0° to 40°C)● Operating humidity: 10% to 90% percent (noncondensing)● Operating altitude test: 40˚C, 9843 ft. (noncondensing)

System memory

● 1024 MB DRAM● 256 MB flash

Available transmit power settings

2.4 GHz● 23 dBm (200 mW)● 20 dBm (100 mW)● 17 dBm (50 mW)● 14 dBm (25 mW)● 11 dBm (12.5 mW)● 8 dBm (6.25 mW)● 5 dBm (3.13 mW)● 2 dBm (1.56 mW)5 GHz● 23 dBm (200 mW)● 20 dBm (100 mW)● 17 dBm (50 mW)● 14 dBm (25 mW)● 11 dBm (12.5 mW)● 8 dBm (6.25 mW)● 5 dBm (3.13 mW)● 2 dBm (1.56 mW)