MR76

General

Radios

2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all four radios Supported frequency bands (country-specific restrictions apply) Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3)

Antenna

List of compatible antennas: MA-ANT-20/21/23/25/27 Antenna are not included, please see "Ordering Information"

802.11ax, 802.11ac Wave 2 and 802.11n Capabilities

DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 2 x 2 multiple input, multiple output (MIMO) with two spatial streams SU-MIMO, UL MU-MIMO** and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax) Note: *40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz & 5 GHz bands Packet aggregation

Power

Power over Ethernet: 802.3af protocol compatible Power consumption: 15W max (802.3af) Power over Ethernet injector sold separately Note: Actual power consumption may vary depending on the AP usage.

Interfaces

1x 10/100/1000 BASE-T Ethernet (RJ45)

Mounting

All standard mounting hardware included Mounts to walls and vertical poles.

Physical Security

Two security screws Concealed mount plate with anti-tamper cable bay

Environment

Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C) Operating and storage humidity: 5 to 95% non-condensing Operating and storage altitude: Up to 40,000 feet (12,192 meters) IP67 Environmental rating

Reliability

Mean Time Between Failure (MTBF): 1,315,612hrs at +25°C operating temperature

Physical Dimensions

11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts and antennas Weight: 1.34 kg

Security

Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)** EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing

Quality of Service

Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping

Mobility

PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming

Analytics

Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application

LED Indicators

1 power/booting/firmware upgrade status

Regulatory

RoHS For additional country-specific regulatory information, please contact Meraki sales

Warranty

Outdoor access point 1 year hardware warranty with advanced replacement included

Ordering Information

MR76-HW: Meraki MR76 Cloud Managed 802.11ax AP MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included) MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included) MA-ANT-20 Meraki Dual-Band Omni Antennas MA-ANT-21 Meraki 5 GHz Sector Antenna MA-ANT-23 Meraki 2.4 GHz Sector Antenna MA-ANT-25 Meraki Dual-Band Patch Antenna MA-ANT-27 Meraki Dual-Band Sector Antenna