Huawei S9706 Chassis with 2*SRUD, 2*AC Power (EH1B06EACD01)

General

Series

Huawei S9706 Switch

Bundle

Huawei S9706 Basic Engine AC Bundle(Including Assembly Chassis, SRUD Main Board*2, 2200W AC Power*2, Basic Software*1)

Switching capacity

6.72 Tbit/s; 14.72 Tbit/s

Packet forwarding rate

2,880 Mpps/5,040 Mpps

Service slots

6

Wireless network management

Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management

User management

unified user management 802.1x, MAC address, and Portal authentication Traffic- and time-based accounting User authorization based on user groups, domains, and time ranges

iPCA quality awareness

Marking real service packets to obtain real-time count of dropped packets and packet loss ratio Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks

SVF 2.0 virtualization

Virtualizing access switches (ASs) and APs into one logical device to simplify management and maintenance Two layers of ASs allowed in an SVF system Third-party devices allowed between SVF parent and clients

VLAN

Supports adding access, trunk, and hybrid interfaces to VLANs Supports the default VLAN Supports VLAN switching Supports QinQ and selective QinQ Supports MAC address-based VLAN assignment

MAC address

Supports automatic learning and aging of MA C addresses Supports static, dynamic, and blackhole MAC address entries Supports packet filtering based on sour ce MAC addresses Supports MAC address limiting based on ports and VL ANs

STP/ERPS

Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) Supports BPDU protection, root protection, and loop protection Supports BPDU tunnel ERPS (G.8032)

IP routing

Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+

Multicast

Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping Supports PIM-SM, PIM-DM, PIM-SSM Supports MSDP, MBGP Supports prompt leave Supports multicast traffic control Supports multicast querier Supports suppression on multicast packets Supports multicast CAC Supports multicast ACL

MPLS

Supports basic MPLS functions Supports MPLS OAM Supports MPLS TE Supports MPLS VPN/VLL/VPLS

Reliability

Supports LACP and E-Trunk Supports VRRP and BFD for VRRP Supports BFD for BGP/IS-IS/OSPF/static route NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP Supports TE FRR and IP FRR Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level) HSR Supports ITU-Y.1731 Supports DLDP

QoS

Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Supports actions of ACL, CAR, re-mark, and schedule Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR Supports congestion avoidance mechanisms, such as WRED and tail drop Supports H-QoS Supports traffic shaping

Network synchronization

Ethernet synchronization 1588v2

Dimensions (H x W x D in mm)

441.7 mm x 442 mm x 489 mm, 10U

Chassis weight(empty)

29 kg

Power supply capability of the equipment

4,400W